Cookie Policy

16mm Narrow Gauge Products

On this page: Coach & Wagon Axleguards and Brakegear

See "How to order" in left Menu for ordering information & our address.

AXLEGUARDS

All axleguards are packed in fours.

ND16 MOD-type Wagon Axleguards    £4.60 (7/8" £6.90)

Coil spring type. Approx. 22mm wide, 26mm high

ND17 Hudson Wagon Axleguards   £3.75 (7/8" £5.65)

Coil spring type, used on sugar cane wagons. Approx. 13mm wide, 18mm high

ND18 Leaf Spring Wagon Axleguards    £4.60 (7/8" £6.90)

With "open" W irons. Approx. 36mm wide (over spring), 26mm high

ND19 Leaf Spring Wagon Axleguards    £3.75 (7/8" £5.65)

Smaller version of ND18. Approx. 29mm wide (over spring), 20mm high.
 

ND57 "Pentewan" Inside Springs Coach Axleguards    £6.30 (7/8" £9.45)

As used on the single coach of the Pentewan Railway in Cornwall.
Supplied in two parts – spring/axlebox rear & W-iron/axlebox front.
Approx. 72mm wide over spring hangers, 29·5mm high.
 

ND58 "Pentewan" Inside Springs Wagon Axleguards    £4.60 (7/8" £6.90)

As used on the open wagons of the Pentewan Railway in Cornwall.
Supplied in two parts – spring/axlebox rear & W-iron/axlebox front.
Approx. 37mm wide over spring hangers, 24mm high.

ND79 Corris-style Plain Wagon Axleguards    £4.15 (7/8" £6.25)

As used on various Corris Railway wagons, and some Private Owner quarry wagons.
Approx. 16mm wide x 9·8mm high.
 

ND80 Corris Clover-leaf Wagon Axleguards    £4.15 (7/8" £6.25)

As used on various wagons of the Corris Railway in Mid Wales.
Supplied in two parts – axlebox rear & axlebox front.
Approx. 14·5mm wide x 15mm high.
 

ND91 Decauville Wagon Axleguards    £4.60 (7/8" £6.90)

As used on various four-wheel open wagons and vans.
Approx. 48mm wide x 23·6mm high.
 

BRAKEGEAR

ND20 MoD Wagon Brake gear    £4.60 (7/8" £6.90)

Single-side type. One each x lever/hanger/rack.

ND21 MoD Wagon Brake Gear    £6.30 (7/8" £9.45)

"Morton" type. Two each x lever/hanger/rack.

ND25 MoD Brake Van    £4.15 (7/8" £6.25)

Single-sided type that was worked from inside the van on the prototype.

 
The brake gear below, usually had a rod below the floor between the plates fitted to the solebars. This is not supplied.
 

ND81 Corris-type Slate Wagon Brake Gear    £5.35 (7/8" £8.05)

As used on slate wagons of the Corris Railway
Suitable for 24mm wheels/c.41mm wheelbase.
Approx. 23mm wide x 21·5mm high (to top of mounting strip).
The brake lever is approx. 53mm long.
 

ND82 Corris-type Slab Wagon Brake Gear    £4.15 (7/8" £6.25)

Type fitted to slab wagons used on the Corris Railway
Suitable for 24mm wheels.
Approx. 35mm wide x 17·5mm high (to top of mounting strip).
The brake lever is approx. 52mm long.
 

ND83 Corris area Private Owner Wagon Brake Gear    £5.35 (7/8" £8.05)

Type fitted to privately-owned open wagons used on the Corris Railway. Single shoe/double-sided: worked on a pair of wheels at one end of the wagon.
Suitable for 24mm wheels.
Approx. 18mm wide x 21·5mm high (to top of mounting strip).
The brake lever is approx. 44mm long.
 

ND84 Corris/GWR Open Wagon Brake Gear    £5.35 (7/8" £8.05)

Type fitted to some iron-bodied open wagons used on the Corris Railway. Two shoe/single-sided: worked on both wheels on one side of the wagon.
Suitable for 24mm wheels/48mm wheelbase
Approx. 25mm wide x 17·2mm high (to top of mounting strip).
The brake lever is approx. 44mm long.
 

ND85 Corris area Private Owner Wagon Brake Gear    £4.15 (7/8" £6.25)

Type fitted to some open wagons used on the Corris Railway. Single shoe/single-sided: worked on a one wheel at one end of the wagon.
Suitable for 24mm wheels.
Approx. 25mm wide x 17·5mm high (to top of mounting strip).
The brake lever is approx. 48mm long.